Common Equity Tier 1 capital, usually shortened to CET1, is the highest-quality financial cushion a bank holds. It is made up almost entirely of common stock and retained earnings, and federal regulators require every bank to maintain a CET1 ratio of at least 4.5% of its risk-weighted assets.1eCFR. 12 CFR 217.10 – Minimum Capital Requirements That 4.5% is a floor, not a target. Once capital buffers and surcharges are stacked on top, the practical requirement for most banks starts around 7% and climbs well into double digits for the largest institutions.
CET1 is the single most watched indicator of whether a bank can absorb losses without failing. It sits at the top of the three-tier capital structure set under the Basel III framework; Additional Tier 1 and Tier 2 capital rank below it in quality and are not covered here.2Bank for International Settlements. Basel III – International Regulatory Framework for Banks
What Counts as CET1 Capital
CET1 is built from instruments that are permanently available to absorb losses. The core component is common stock, including surplus from issuing shares above par value. To qualify, the stock has to represent the most junior claim on the bank’s assets in a failure, carry no maturity date, and give the bank full discretion to skip dividends without triggering a default.3eCFR. 12 CFR 217.20 – Capital Components and Eligibility Criteria for Regulatory Capital Instruments
Retained earnings are the second major building block. When a bank earns a profit and chooses not to distribute it, those earnings accumulate on the balance sheet and directly increase CET1. Accumulated other comprehensive income also factors in, capturing unrealized gains and losses on items like available-for-sale securities. Qualifying minority interests round out the list, subject to strict limits on how much can count.
What makes these components valuable to regulators is that none of them create an obligation to pay anyone back. A bank doesn’t owe interest on retained earnings the way it does on a bond. CET1 stays available to cover losses in real time, without draining cash flow during a crisis.
What Gets Deducted
Banks don’t get to count everything on the balance sheet. Federal rules require specific deductions that strip out assets unlikely to hold their value during a crisis.4eCFR. 12 CFR 217.22 – Deductions
Goodwill is the biggest one. When a bank acquires another company and pays more than the fair value of its net assets, the premium gets booked as goodwill. It looks like an asset, but you can’t sell goodwill to cover depositor withdrawals. It is deducted in full from CET1, net of any related deferred tax liabilities. Other intangibles — customer lists, trademarks, proprietary technology — face the same treatment. Mortgage servicing assets are an exception and may partially count, but only up to a threshold. Deferred tax assets that depend on future profitability are also deducted, because a bank that is losing money won’t be generating the taxable income needed to realize them.
The deductions matter. A bank can look well-capitalized on paper, but once goodwill from a string of acquisitions and intangibles from its technology platform come out, the actual loss-absorbing cushion is often considerably thinner.
How the Ratio Is Calculated
The formula is straightforward: divide CET1 capital, after deductions, by total risk-weighted assets, then express the result as a percentage. A bank with $9 billion in CET1 and $100 billion in risk-weighted assets has a CET1 ratio of 9%.
The denominator is the key. Risk-weighted assets, or RWA, adjust every holding on the bank’s books based on how likely it is to lose value. That prevents a bank from inflating its ratio by loading up on high-yield, high-risk loans.
Different asset classes receive standardized risk weights:
- Cash and direct obligations of the U.S. government carry a 0% weight. A dollar of cash counts as zero risk-weighted assets, so holding more of it doesn’t change capital requirements.5National Credit Union Administration. Risk Weights at a Glance
- First-lien residential mortgages that are current carry a 50% weight. A $200,000 mortgage counts as $100,000 in RWA.
- Commercial loans to private businesses carry a 100% weight. Every dollar counts at face value.
Operational risk and market risk also feed into the RWA total alongside credit risk.6Bank for International Settlements. Calculation of Minimum Risk-Based Capital Requirements A bank that shifts from commercial lending toward government bonds will see its RWA drop even if total assets stay flat, which mechanically pushes its CET1 ratio higher. That is by design. Regulators want banks holding riskier portfolios to hold proportionally more capital.
Minimums, Buffers, and the Real Target
The hard floor is 4.5% of risk-weighted assets.1eCFR. 12 CFR 217.10 – Minimum Capital Requirements No bank actually aims for 4.5%. Falling to that level triggers severe consequences, and layered buffer requirements push the effective target much higher.
Capital Conservation Buffer
On top of the 4.5% minimum, banks must hold a capital conservation buffer of 2.5% of risk-weighted assets, composed entirely of CET1.7eCFR. 12 CFR 217.11 – Capital Conservation Buffer, Countercyclical Capital Buffer Amount, and GSIB Surcharge That brings the working minimum to 7% for most banks. The buffer is meant to be built up in good times so it can absorb losses in bad ones without breaching the 4.5% floor.
Dipping into the buffer doesn’t violate the minimum, but it triggers escalating restrictions on capital distributions:
- Buffer above 2.5%: no restrictions. Dividends and discretionary bonuses can be paid freely.
- Buffer between 1.875% and 2.5%: distributions capped at 60% of eligible retained income.
- Buffer between 1.25% and 1.875%: capped at 40%.
- Buffer between 0.625% and 1.25%: capped at 20%.
- Buffer at or below 0.625%: no distributions or discretionary bonuses allowed.
Those graduated restrictions are the enforcement mechanism. Shareholders and executives have a strong incentive to keep the buffer intact, because breaching it means dividend cuts and bonus freezes.
Countercyclical Capital Buffer
The Federal Reserve can activate an additional countercyclical buffer of up to 2.5% of risk-weighted assets when credit growth is running too hot. The Fed has kept this buffer at 0% for the United States for most of its existence, but the authority remains available.
Stress Capital Buffer
Large bank holding companies with $100 billion or more in assets are subject to the stress capital buffer, which replaces the static 2.5% conservation buffer at the holding-company level. Each year the Fed runs hypothetical crisis scenarios through the bank’s balance sheet and sets a firm-specific buffer based on projected losses.8Federal Reserve. Dodd-Frank Act Stress Tests The SCB is floored at 2.5% but can run meaningfully higher for banks with riskier portfolios.
G-SIB Surcharge
The largest and most interconnected banks face a Global Systemically Important Bank surcharge on top of everything else. Banks are sorted into buckets based on size, interconnectedness, complexity, cross-border activity, and the substitutability of the services they provide. The surcharge is paid entirely in CET1:9Bank for International Settlements. The G-SIB Framework – Executive Summary
- Bucket 1: 1.0%
- Bucket 2: 1.5%
- Bucket 3: 2.0%
- Bucket 4: 2.5%
- Bucket 5: 3.5%
Stacked together, the largest U.S. banks face effective CET1 requirements well above 10%. The 4.5% floor plus a firm-specific stress capital buffer, a potential countercyclical buffer, and a G-SIB surcharge can push the real target into the 12% to 13% range.
What Happens If the Ratio Falls
Regulators don’t wait for a complete failure before stepping in. The prompt corrective action framework sorts every insured institution into capital categories, each carrying escalating consequences:
- Well-capitalized, with a CET1 ratio at or above 6.5%: no restrictions.10eCFR. 12 CFR 324.403 – Capital Measures and Capital Category Definitions
- Adequately capitalized, at or above 4.5%: meets the minimum, but may face limits on brokered deposits and other activities.
- Undercapitalized, below 4.5%: must submit a capital restoration plan, cannot grow assets without approval, and is barred from opening new branches or entering new business lines.11Federal Deposit Insurance Corporation. Section 38 – Prompt Corrective Action
- Significantly undercapitalized, below 3.0%: regulators can force share issuance, restrict affiliate transactions, cap deposit interest rates, and require a sale or merger.
- Critically undercapitalized: the FDIC is generally required to appoint a receiver within 90 days, which effectively means the bank is seized and wound down.
CET1 is not the only ratio regulators check. Total capital, Tier 1, and leverage ratios also factor in, and a bank is categorized by its weakest ratio. CET1 is often the binding constraint, though, because it has the strictest composition requirements.
Why the Number Matters to Investors and Depositors
Banks with strong CET1 ratios have more freedom to lend, pay dividends, repurchase shares, and pursue acquisitions. A bank operating well above its required minimums doesn’t need to worry about tripping buffer restrictions every time loan losses tick up. Banks running close to their floors face constant pressure to either raise capital or shrink the balance sheet.
For investors evaluating bank stocks, the CET1 ratio is one of the first numbers worth checking. A high ratio suggests the bank can weather a downturn and keep returning capital to shareholders. A ratio declining over several quarters can signal deteriorating asset quality or aggressive lending that may eventually force a capital raise. The ratio also affects credit ratings, borrowing costs, and counterparty willingness to do business with the bank.
For depositors, the framework provides a layer of protection that didn’t exist in its current form before 2013. FDIC insurance covers deposits up to $250,000 regardless of a bank’s capital ratio, but higher CET1 requirements across the industry reduce the probability that the insurance fund gets tested in the first place.