Internal Revenue Code Section 414 forces you to treat separate businesses as a single employer for retirement plan testing whenever they share the kind of common ownership, service relationship, or staffing arrangement the statute targets. For controlled groups specifically, that means Section 414(b) and (c) sweep every employee of every entity in the group into one pool for coverage and nondiscrimination testing, based on mechanical ownership thresholds. If you own or control more than one business and run a qualified plan out of any of them, the rules almost certainly reach you.
The Three Controlled Group Structures
Section 414(b) covers corporations and Section 414(c) extends the same logic to partnerships, sole proprietorships, and LLCs.1Office of the Law Revision Counsel. 26 USC 414 – Definitions and Special Rules The tests borrow their mechanics from Section 1563, and they identify one of three structures.
Parent-Subsidiary Groups
A parent-subsidiary group exists when a parent corporation owns at least 80% of one or more subsidiary corporations. That 80% is measured by either the total combined voting power of all voting stock or the total value of all shares of all classes of stock. The parent must directly own 80% of at least one subsidiary, and each other subsidiary must be 80%-owned by one or more corporations within the chain.2Office of the Law Revision Counsel. 26 USC 1563 – Definitions and Special Rules
Brother-Sister Groups
Brother-sister groups apply when the same small group of people owns two or more businesses. The test looks at five or fewer individuals, estates, or trusts who own stock in each corporation, and for Section 414 purposes those common owners must satisfy two requirements at the same time:2Office of the Law Revision Counsel. 26 USC 1563 – Definitions and Special Rules
- The five-or-fewer owners must collectively hold at least 80% of the voting power or total stock value of each corporation.
- The same owners must collectively hold more than 50% of each corporation, counting each person’s ownership only to the extent it is identical across every corporation being tested.
The identical ownership piece is where most business owners miscount. If Owner A holds 60% of Corporation X and 30% of Corporation Y, only 30% counts toward the identical ownership test, because that is the smaller of the two stakes. Add each owner’s identical percentage across the corporations, and the total must exceed 50%.
Combined Groups
A combined group exists when three or more corporations are linked through both parent-subsidiary and brother-sister relationships. At least one corporation must serve as the common parent of a parent-subsidiary chain while also belonging to a brother-sister group. Every entity in the resulting web is aggregated.
Attribution: Ownership You Don’t Directly Hold
The 80% and 50% thresholds are not measured by your direct holdings alone. Constructive ownership rules under Section 1563(e) automatically attribute other people’s stock to you, and this is where owners of closely held businesses most often get surprised.
You are treated as owning stock held by your minor children (under age 21), and a minor child is treated as owning stock held by their parents. Spousal attribution also applies by default. It can be turned off for a specific corporation only if all four of these conditions hold: the individual owns no direct stock in that corporation, is not a director or employee, the corporation does not derive more than half its income from passive sources, and no restrictions on the spouse’s ability to sell the stock run in favor of the individual or their minor children.2Office of the Law Revision Counsel. 26 USC 1563 – Definitions and Special Rules Stock owned by adult children (age 21 and older), grandchildren, and parents of an adult individual is not automatically attributed.
Organizational attribution works through entities. Stock owned by a corporation, partnership, trust, or estate can be attributed to its owners, and vice versa, under mechanical formulas. Attribution is applied before you test the thresholds, which is why the controlled group answer often looks nothing like the ownership chart on the wall.
When Aggregation Happens Without 80% Ownership
Common ownership is not the only path into a single-employer determination. Section 414(m) creates the affiliated service group (ASG) rules for professional and service businesses that split operations across entities. An ASG applies to “service organizations,” meaning any entity whose principal business is performing services. Three relationships trigger aggregation.
An A-Org exists when a service organization is a shareholder or partner in a First Service Organization (FSO) and either regularly performs services for the FSO or regularly works with the FSO in serving third-party clients.3Wolters Kluwer CCH AnswerConnect. 26 USC 414(m) – Employees of an Affiliated Service Group The medical practice organized as a partnership of separately incorporated physicians is the textbook example: each professional corporation is an A-Org, and all of the corporations’ employees get pooled with the FSO’s.
A B-Org captures support entities. An organization is a B-Org when a significant portion of its business involves performing services for the FSO or an A-Org that would historically have been done by in-house employees, and at least 10% of its ownership interests are held by highly compensated employees of the FSO or an A-Org.3Wolters Kluwer CCH AnswerConnect. 26 USC 414(m) – Employees of an Affiliated Service Group A billing company partly owned by the practice’s doctors and doing work formerly done by in-house staff fits this pattern.
Management organizations are the third category. An entity whose principal business is performing management functions on a regular and continuing basis for another organization is aggregated with that organization.1Office of the Law Revision Counsel. 26 USC 414 – Definitions and Special Rules No common ownership is required. If you outsource day-to-day management to a company that exists primarily to manage your operations, aggregation applies regardless of who owns what.
Leased Employees
Section 414(n) reaches workers you don’t employ directly. A business that uses staffing-company workers must count them as its own for plan testing when three conditions are met:1Office of the Law Revision Counsel. 26 USC 414 – Definitions and Special Rules
- The services are provided under an arrangement between the recipient and the leasing organization.
- The worker has performed services for the recipient on a substantially full-time basis for at least one year. Substantially full-time generally means at least 1,500 hours over a 12-month period.
- The recipient directs or controls how the work gets done. Independent contractors who control how they deliver their services do not fall into this category.
A safe harbor lets a recipient exclude leased employees if the leasing organization maintains a qualifying plan of its own. That plan must be a money purchase pension plan with a nonintegrated employer contribution of at least 10% of each participant’s compensation, full and immediate vesting, and immediate participation for all of the leasing organization’s employees.1Office of the Law Revision Counsel. 26 USC 414 – Definitions and Special Rules Even then, the safe harbor is available only if leased employees make up no more than 20% of the recipient’s nonhighly compensated workforce. Cross that threshold and every leased employee must be included in the recipient’s testing regardless of the leasing company’s plan.
What Aggregation Actually Does to Your Plan
Once you’ve correctly assembled the aggregated employee population, that pool is the basis for identifying highly compensated employees (HCEs) and running coverage and nondiscrimination tests.
An employee is an HCE if they meet either the ownership test or the compensation test for the look-back year (the year preceding the current plan year).4Office of the Law Revision Counsel. 26 USC 414 – Definitions and Special Rules The ownership test captures anyone who was a 5% owner of the employer at any time during the current plan year or the look-back year, using the same constructive ownership rules used for controlled group testing. The compensation test captures anyone whose look-back year compensation exceeded the annually adjusted threshold, which is $160,000 for plan years beginning in 2026.5Internal Revenue Service. COLA Increases for Dollar Limitations on Benefits and Contributions Compensation from every entity in the aggregated group must be combined when running this determination.
Coverage testing under Section 410(b) then compares the percentage of NHCEs who benefit under the plan to the percentage of HCEs who benefit. Under the ratio percentage test, the NHCE percentage must be at least 70% of the HCE percentage.6Office of the Law Revision Counsel. 26 USC 410 – Minimum Participation Standards If 100% of HCEs benefit, at least 70% of NHCEs must also benefit. The point of the aggregation rules is to make sure the denominators of these ratios include the employees at the entities you’d otherwise have excluded.
Section 401(a)(4) then requires that contributions or benefits not disproportionately favor HCEs.7Office of the Law Revision Counsel. 26 USC 401 – Qualified Pension, Profit-Sharing, and Stock Bonus Plans For 401(k) plans, the actual deferral percentage (ADP) and actual contribution percentage (ACP) tests add another layer, and the 2026 elective deferral limit is $24,500.8Internal Revenue Service. 401(k) Limit Increases to $24,500 for 2026, IRA Limit Increases to $7,500
What Happens If You Get Aggregation Wrong
A plan that fails testing because entities were left out of the aggregated pool can be disqualified. The tax consequences hit from multiple directions.
For HCEs, disqualification for a coverage or nondiscrimination failure means each HCE must include their entire vested account balance in income to the extent not previously taxed. NHCEs generally get better treatment: they include only employer contributions made during the disqualified years, and if the sole reason for disqualification is a coverage or nondiscrimination failure, NHCEs do not include employer contributions in income until those amounts are actually distributed.9Internal Revenue Service. Tax Consequences of Plan Disqualification
The employer loses its deduction for contributions. For defined benefit plans that do not maintain separate accounts, the employer cannot deduct any contributions at all. The plan trust loses its tax-exempt status and must file Form 1041 and pay income tax on trust earnings. Employer contributions become subject to Social Security, Medicare, and federal unemployment taxes. Distributions from a disqualified plan cannot be rolled over to an IRA or another eligible retirement plan.9Internal Revenue Service. Tax Consequences of Plan Disqualification
Fixing an Aggregation Mistake
The IRS runs a formal correction framework called the Employee Plans Compliance Resolution System (EPCRS) for plans that discover qualification failures, including aggregation errors. Three programs are scaled to the severity and timing of the problem:10Internal Revenue Service. EPCRS Overview
- The Self-Correction Program lets a sponsor fix certain failures without contacting the IRS or paying a fee. It is generally available for operational failures that are corrected promptly or that qualify as insignificant.
- The Voluntary Correction Program requires a user fee and a written submission to the IRS before any audit begins. VCP produces a written IRS agreement confirming the correction was proper.
- The Audit Closing Agreement Program resolves failures found during an examination. Sanctions are more substantial, but the plan avoids disqualification.
Aggregation errors often stretch across several years and multiple entities. Correcting them usually means retroactively including the excluded employees, making contributions on their behalf, and redoing testing for every affected year. Earlier discovery means smaller corrections. Owners who acquire or start additional businesses should review their controlled group and ASG status every year rather than waiting for an audit.
Transition Relief After a Merger or Acquisition
Group membership can change overnight in a business transaction, and Section 410(b)(6)(C) provides a transition period so a plan that satisfied coverage before the deal is not immediately disqualified because of the change alone.6Office of the Law Revision Counsel. 26 USC 410 – Minimum Participation Standards The transition period begins on the date group membership changes and ends on the last day of the first plan year beginning after that date. For a calendar-year plan that undergoes a mid-2026 acquisition, the transition period runs through December 31, 2027.
Two conditions apply: the plan must have passed the minimum coverage test immediately before the transaction, and the plan’s coverage and design cannot change significantly during the transition period other than the group membership change itself. The relief covers only the minimum coverage test. The general Section 401(a)(4) nondiscrimination test and, for 401(k) plans, the ADP and ACP tests still must be passed during the transition period.