Can You Buy ATM Machines? Costs, Compliance, and Setup

Yes, you can buy an ATM machine. Anyone in the United States is legally allowed to purchase and operate one, and new units typically run between $2,300 and $4,400 depending on the model. The business itself is simple: a customer pays a surcharge every time they withdraw cash, and you keep that fee or split it with your processor and the location owner. What makes it more involved than it looks is the layer of federal anti-money-laundering rules, accessibility standards, card-network requirements, and tax obligations that attach the moment you plug the machine in.

What a Machine Costs

New ATMs generally fall into three price tiers. Basic freestanding retail units suitable for convenience stores, bars, and small shops run roughly $2,300 to $2,800. Mid-range models with larger screens, higher cash capacity, and additional software features cost $2,900 to $3,600. Through-the-wall units built for 24/7 outdoor access at banks or secure facilities land between $3,700 and $4,400. These are 2025 figures and shift as manufacturers adjust.

Refurbished units can drop the entry cost by 30% to 50%, but a used machine is only a bargain if it has a current-generation EMV chip reader and a PIN pad that still meets current encryption standards. A machine that saves you $1,000 upfront and then needs a $600 hardware upgrade to pass compliance is not actually cheaper.

Sales tax applies in most states. Combined state and local rates range from zero in five states up to roughly 10% in the highest-tax jurisdictions, so factor that into your total acquisition cost along with professional installation (typically $200 to $400) and the first load of vault cash.

What You Can Expect to Earn

Revenue comes from the surcharge each customer pays per withdrawal, commonly between $2.00 and $4.00. Industry surveys put the average ATM owner surcharge at roughly $3.22, with higher fees at bars, event venues, and tourist areas.

A typical privately owned ATM processes around 300 transactions per month. At a $3.00 surcharge with no split, that works out to about $900 per month in gross revenue before you subtract the cost of the machine, processing fees, telecommunications, insurance, and the opportunity cost of keeping cash locked inside the vault. Lower-traffic locations might see 100 transactions or fewer. Site selection matters more than almost anything else in this business.

Setting Up the Business First

Before buying equipment or signing any agreements, form a business entity. Most ATM operators use a Limited Liability Company because it separates personal assets from business liabilities. Register the LLC with your state, then apply for an Employer Identification Number from the IRS. The EIN is your federal tax ID and is required to open the business bank account that will fund the machine’s cash vault.1Internal Revenue Service. Get an Employer Identification Number

You also need a dedicated “vault cash” bank account. When a customer withdraws $200 from your ATM, that $200 gets replenished to your account, typically the next business day, through the processing network. Your surcharge revenue settles separately. Keeping these flows in one account makes reconciliation manageable at tax time.

Federal Anti-Money-Laundering Rules

There is no permit called an “ATM license,” but that does not mean the business is unregulated. Independent ATM operators whose activities meet the definition of a Money Services Business under the Bank Secrecy Act may be required to register with the Financial Crimes Enforcement Network using FinCEN Form 107. Registration must happen within 180 days of establishing the business and must be renewed every two years.2Financial Crimes Enforcement Network. Money Services Business (MSB) Registration Whether your operation qualifies as an MSB depends on specifics like transaction volume and how funds move through your system, so getting guidance from a compliance professional early is worth the cost.3Financial Crimes Enforcement Network. MSB-ATM-Guidance – Joint Filing of SARs

Regardless of MSB classification, Bank Secrecy Act compliance touches every ATM operator. Financial institutions must file Currency Transaction Reports for cash transactions exceeding $10,000 in a single day.4Financial Crimes Enforcement Network. Notice to Customers – A CTR Reference Guide A single-machine operation is unlikely to hit that threshold often, but operators running multiple high-volume machines need systems to flag and report qualifying activity. Suspicious Activity Reports may also be required when transactions look unusual.

Operators classified as MSBs must maintain a written anti-money-laundering program with internal policies, a designated compliance officer, employee training, and independent review. AML records, filed CTRs, and SARs must be retained for five years.5Internal Revenue Service. Examination Techniques for Bank Secrecy Act Industries

What the Bank Will Ask You For

When you open the vault cash account and apply for processing, the bank runs its own due diligence on you under Customer Identification Program rules required by the USA PATRIOT Act. Expect to provide government-issued photo identification, your taxpayer identification number, proof of your business address, and potentially your Social Security number for a background check.6Financial Crimes Enforcement Network. Interagency Interpretive Guidance on Customer Identification Program Requirements Under Section 326 of the USA PATRIOT Act Failing the bank’s vetting means no processing contract, and without a processing contract, the machine cannot connect to any card network.

Processing and Location Agreements

Your ATM cannot connect to Visa, Mastercard, or other card networks on its own. You need a sponsoring bank that is a member of those networks to vouch for your machine. This is formalized through a sponsorship agreement, often arranged by an Independent Sales Organization that acts as a middleman between you and the bank.7SEC.gov. Exhibit 10.54 – American State Bank Sponsorship Agreement The ISO typically handles the technical processing as well, routing each transaction from your machine through the card networks to the cardholder’s bank and back.

When comparing ISOs, focus on three numbers: the per-transaction processing fee (commonly $0.10 to $0.50), any monthly service or statement fees, and the surcharge split ratio if the ISO takes a cut of each surcharge. A processor charging $0.25 per transaction with no surcharge split may be cheaper than one charging $0.10 per transaction but taking $0.50 of every surcharge. Run the math against your expected volume before signing. Some ISOs will bundle the hardware with the processing agreement, which simplifies setup but can lock you into less favorable split terms.

If you are placing a machine on someone else’s property, you need a written Location Agreement. It should specify how the surcharge is divided (location owners commonly receive $0.25 to $1.00 per transaction), who pays for electricity and internet, who is responsible for cash loading, what happens if either party wants to end the arrangement, and whether you have exclusive rights to operate an ATM at that location. Skipping this contract is the fastest way to lose a profitable placement when the property owner decides to bring in a competitor or demands a bigger cut.

ADA Accessibility Standards

Any ATM placed in a location open to the public must comply with the Americans with Disabilities Act. The 2010 ADA Standards, incorporated into federal regulation at 28 CFR Part 36, include Section 707, which sets detailed technical requirements for ATMs. The main three are speech output capability (the machine must be able to talk the user through every transaction step), tactile input controls that can be identified by touch, and Braille instructions for initiating speech mode.8eCFR. 28 CFR Part 36 – Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities

Physical placement matters too. The maximum side-reach height under current standards is 48 inches above the floor so that wheelchair users can access the card slot, keypad, and cash dispenser without obstruction. If you are placing an ATM in an existing building, the general barrier-removal obligation under 28 CFR 36.304 requires that you make the machine accessible where doing so is “readily achievable,” meaning it can be done without significant difficulty or expense.9eCFR. 28 CFR 36.304 – Removal of Barriers ADA civil penalties are adjusted for inflation annually, and the exposure from a single complaint can dwarf the cost of buying a compliant machine in the first place.

EMV and PIN Security

EMV chip-reading capability is not a government mandate. It is an industry standard with financial teeth. Since the major card networks shifted fraud liability in 2015, any ATM that processes a chip card transaction without using the chip reader absorbs full liability for fraudulent withdrawals. Running a machine without EMV capability is gambling with your own money every time a stolen card gets inserted.

ATM PIN pads must also comply with PCI PIN Security Requirements that govern how encryption keys are stored and transmitted. New machines from reputable manufacturers typically ship compliant, but used units may have older PIN pads that no longer meet current requirements. Before buying refurbished, confirm the PIN entry device has not been sunset by the payment networks.

Installing and Activating the Machine

Physical security comes first. The unit should be anchored to a concrete floor using heavy-duty expansion bolts. An unsecured freestanding ATM loaded with cash is an invitation for someone to wheel it out the door after hours.

Connectivity requires either a hardwired Ethernet connection or a cellular modem. Cellular is more common for independent operators because it works in locations without a dedicated internet line and removes the dependency on the location owner’s network. Monthly wireless service runs $15 to $40.

Software activation involves entering unique encryption keys provided by your processor. These keys secure the communication channel between your machine and the banking network and protect PIN data during every transaction. The step is sometimes called Terminal Master Key injection. A misconfigured key means the machine cannot authorize transactions.

After activation, load your initial vault cash. Most operators start with $1,000 to $3,000 in twenty-dollar bills. A busy bar on a Friday night can burn through $2,000 in a single evening, so remote cash monitoring (a feature on most modern machines) prevents “out of service” messages that cost you surcharge revenue. Run a live test withdrawal with your own debit card before opening the machine to the public.

Insurance, Ongoing Costs, and Taxes

An ATM sitting in a convenience store with $2,000 in cash inside is a target. At minimum you need three types of coverage: equipment coverage for damage, theft, or vandalism to the machine; cash coverage for the money in the vault and in transit while you are restocking; and general liability coverage for injuries or property damage tied to the ATM area. A broker may also recommend crime coverage and cyber liability. These policies are not expensive relative to the exposure.

Recurring costs include processing fees ($0.10 to $0.50 per transaction), cellular connectivity ($15 to $40 per month), receipt paper, and software and firmware updates (particularly security patches). Cash loading is the biggest ongoing operational task. Some operators load weekly themselves; higher-volume operations use armored car services. Self-loading saves money but puts you personally in charge of transporting cash.

Surcharge income is business income. The IRS expects you to report it on Schedule C of your personal tax return, or on your business entity’s return if you operate through a corporation.10Internal Revenue Service. Publication 525 (2025), Taxable and Nontaxable Income As a self-employed operator, you also owe self-employment tax of 15.3% on net earnings (12.4% for Social Security and 2.9% for Medicare), on top of regular income tax.11Internal Revenue Service. Self-Employment Tax (Social Security and Medicare Taxes) This is not withheld automatically, so new operators should set aside estimated tax payments quarterly.

On the deduction side, the cost of the ATM hardware itself may qualify for an immediate write-off under Section 179, which for 2026 allows eligible businesses to deduct up to $2,560,000 in qualifying equipment placed in service that year. A $3,000 ATM is well within the limit. Ongoing deductible expenses include processing fees, cellular service, vault cash insurance premiums, mileage for cash-loading trips, and any rent or profit-sharing payments to location owners. Track everything from day one.