Every nationally chartered bank and federal savings association in the United States must maintain a Tier 1 leverage ratio of at least 4%, meaning $4 of core capital for every $100 of average total consolidated assets. Bank leverage ratio requirements layer on top of that floor: the biggest global banks face up to 4.75% under rules effective April 1, 2026, mid-sized large banks must hold a 3% supplementary leverage ratio against a broader exposure base, and small banks can opt into a simplified 9% test instead of the full capital framework. The leverage ratio is a hard floor that ignores how risky a bank claims its assets are.
The 4% Minimum Every US Bank Must Meet
The basic requirement is set in federal capital rules: a Tier 1 leverage ratio of 4%, measured as Tier 1 capital divided by average total consolidated assets.1eCFR. 12 CFR 3.10 – Minimum Capital Requirements It applies to every nationally chartered bank and federal savings association, with no size exemption.
That 4% floor sits alongside three risk-based minimums a bank must also satisfy at the same time: a 4.5% common equity Tier 1 ratio, a 6% Tier 1 capital ratio, and an 8% total capital ratio.1eCFR. 12 CFR 3.10 – Minimum Capital Requirements The risk-based ratios weight assets by riskiness; the leverage ratio does not. For a bank holding large positions in Treasuries or central bank reserves, the leverage ratio is often the tighter of the four, because those assets consume no risk-weighted capital but still count fully against the leverage denominator.
How the Ratio Is Calculated
The numerator is Tier 1 capital: common equity Tier 1 plus a narrow category of additional Tier 1 instruments.2eCFR. 12 CFR 3.2 – Definitions In practice this is common stock, retained earnings, and loss-absorbing instruments that work while the bank is a going concern. Subordinated debt and other borrowed money do not count.
The denominator for the basic 4% ratio is average total consolidated assets with certain deductions. For the supplementary leverage ratio that applies to larger institutions, the denominator broadens to pull in off-balance-sheet exposures: derivative contracts, repo-style transactions, and undrawn credit commitments. That wider net is deliberate. It prevents large banks from parking risk in structures that a simple balance sheet would miss.
One recurring question is whether deposits held at the Federal Reserve can be excluded from the denominator. The agencies have repeatedly declined to allow that. A December 2025 final rule confirmed that the supplementary leverage ratio “continues to broadly treat exposures equally” and does not exclude central bank reserves.3Federal Register. Regulatory Capital Rule: Modifications to the Enhanced Supplementary Leverage Ratio Standards for US Global Systemically Important Bank Holding Companies The narrow exception is custody banks that qualify under Section 402 of the Economic Growth, Regulatory Relief, and Consumer Protection Act, which lets a banking organization whose assets under custody are at least 30 times its total assets exclude the lesser of its qualifying central bank deposits or the amount in linked fiduciary and custodial deposit accounts.4Federal Register. Regulatory Capital Rule: Revisions to the Supplementary Leverage Ratio To Exclude Certain Central Bank Deposits of Banking Organizations Predominantly Engaged in Custody, Safekeeping, and Asset Servicing Activities Only a handful of institutions qualify.
What Each Leverage Ratio Threshold Triggers
A bank’s leverage ratio determines which capital category it falls into under the prompt corrective action framework, and the category dictates how regulators respond.
- Well capitalized: leverage ratio of 5% or greater.
- Adequately capitalized: 4% or greater.
- Undercapitalized: below 4%.
- Significantly undercapitalized: below 3%.
- Critically undercapitalized: tangible equity to total assets at or below 2%.5eCFR. 12 CFR 6.4 – Capital Measures and Capital Categories
The gap between 4% and 5% matters more than it looks. A bank at 4.5% has cleared the minimum but is only “adequately capitalized,” which can block it from accepting brokered deposits and from activities that require well-capitalized status. Falling into “undercapitalized” territory starts a cascade: the OCC begins monitoring, the bank must file a written capital restoration plan within 45 days, asset growth is restricted, expansion needs prior approval, and distributions to shareholders and management fees face immediate limits.6eCFR. 12 CFR Part 6 – Prompt Corrective Action A critically undercapitalized bank can be placed into receivership.
The Supplementary Leverage Ratio for Large Banks
Three categories of large US banking organizations must also meet a supplementary leverage ratio of at least 3%:1eCFR. 12 CFR 3.10 – Minimum Capital Requirements
- Category I: US global systemically important banks and their depository institution subsidiaries.
- Category II: organizations with at least $700 billion in total consolidated assets or at least $75 billion in cross-jurisdictional activity.
- Category III: organizations with at least $250 billion in total consolidated assets or at least $75 billion in weighted short-term wholesale funding, nonbank assets, or off-balance-sheet exposure.7Federal Register. Regulatory Capital Rule: Modifications to the Enhanced Supplementary Leverage Ratio Standards for US Global Systemically Important Bank Holding Companies
The SLR uses the broader exposure denominator that includes derivatives, repo-style transactions, and undrawn commitments. Falling below 3% restricts dividends and discretionary bonus payments until capital is rebuilt.
The Enhanced SLR for Globally Systemic Banks
The eight US firms designated as global systemically important banks face additional requirements through the enhanced supplementary leverage ratio. A final rule published in December 2025 and effective April 1, 2026 restructured how this buffer is set.3Federal Register. Regulatory Capital Rule: Modifications to the Enhanced Supplementary Leverage Ratio Standards for US Global Systemically Important Bank Holding Companies
Holding Company Buffer
The previous framework from 2014 added a flat 2% buffer on top of the 3% SLR minimum, giving every G-SIB holding company a uniform 5% requirement. The 2026 rule replaces that with a calibrated buffer equal to half of the firm’s method 1 G-SIB surcharge.8Federal Reserve. Final Rule to Modify the Enhanced Supplementary Leverage Ratio Method 1 surcharges for US G-SIBs currently run from 1.0% to 3.5% of risk-weighted assets, so the new leverage buffers run from 0.5% to 1.75%. The resulting supplementary leverage ratio needed to avoid payout restrictions sits between 3.5% and 4.75%, depending on the firm.
Insured Depository Subsidiaries
The old rule required a G-SIB’s insured depository institution subsidiaries to maintain a 6% supplementary leverage ratio to be classified as well capitalized. The 2026 final rule drops that fixed 6% threshold. Subsidiary institutions now face a buffer equal to half of their parent’s method 1 surcharge, capped at 1%, on top of the 3% SLR minimum. The adequately capitalized threshold stays at 3%. Most G-SIB subsidiaries now face an effective eSLR requirement between 3.5% and 4%.
Graduated Payout Limits
When a G-SIB’s supplementary leverage ratio is above 3% but short of its full buffer requirement, distributions are capped on a sliding scale based on how much of the required buffer the bank still holds:9eCFR. 12 CFR Part 217 Subpart B – Capital Ratio Requirements and Buffers
- Buffer at or above the requirement: no restriction.
- Buffer between 75% and 100% of the requirement: payouts capped at 60% of eligible retained income.
- Buffer between 50% and 75%: capped at 40%.
- Buffer between 25% and 50%: capped at 20%.
- Buffer at or below 25%: no distributions or discretionary bonus payments.
Nobody wants to tell shareholders a dividend is off the table, so G-SIBs in practice run with a comfortable margin above the buffer.
The 9% Opt-In for Community Banks
Smaller banks can skip the full risk-based framework by electing the community bank leverage ratio. To qualify, a bank must have:10eCFR. 12 CFR 3.12 – Community Bank Leverage Ratio Framework11Federal Register. Regulatory Capital Rule: Revisions to the Community Bank Leverage Ratio Framework
- Less than $10 billion in total consolidated assets.
- A leverage ratio above 9%.
- Trading assets and liabilities of 5% or less of total assets.
- Off-balance-sheet exposures of 25% or less of total assets.
A qualifying bank that elects the CBLR is automatically treated as well capitalized and skips the risk-weighted calculations larger banks must perform. The trade-off is that 9% is more than double the basic 4% minimum, but for a bank with a straightforward loan book, the compliance savings are the point.
If the ratio dips below 9%, the bank gets a grace period of two Call Report filing periods to either rebuild its ratio or move onto the standard risk-based framework. During that window it is still treated as a qualifying community banking organization and still well capitalized.
Two situations get no grace period. If the leverage ratio falls to 8% or below, the bank must immediately start complying with the full risk-based capital requirements and report every required capital measure for that quarter. A bank that loses eligibility because of a merger or acquisition also gets no grace period. The 8% cliff is the detail most likely to catch a community bank off guard: the gap between an 8.5% ratio and a 7.9% ratio is the gap between a two-quarter runway and an immediate switch.
Why the Leverage Ratio Exists Alongside Risk-Based Rules
The leverage ratio and the risk-based ratios do different jobs. Risk-based ratios assign weights to different assets — a Treasury bond might carry a 0% weight while a commercial loan carries 100% — so capital tracks actual risk. The leverage ratio treats every dollar of assets the same, which is blunt but hard to game.
Which one actually constrains a bank depends on what it holds. A balance sheet heavy in government bonds and reserves consumes little risk-weighted capital, so the leverage ratio tends to be the binding floor. A balance sheet concentrated in commercial real estate pushes the risk-based ratios to the front. The binding constraint also shifts over the cycle: in calm periods when models show low risk, the leverage ratio sets the floor; when stress hits and risk weights jump, the risk-based ratios tighten.
That split is deliberate. Risk models underestimated losses in 2008, and the leverage floor exists as a backstop that does not depend on anyone’s judgment about how risky the world looks at the moment. A bank that comfortably clears its risk-based requirements but barely clears its leverage ratio is holding exactly the portfolio regulators worry about: one that looks safe by the models but may not be.