ATM Placement Agreements: Vault Cash, Commissions, and Exclusivity

An ATM placement agreement is the contract between a property owner or tenant and the company that installs and operates a cash machine on the premises, and the terms you accept at signing will drive your revenue, your obligations, and your ability to walk away for years. Almost every clause is negotiable, especially for high-traffic locations, but the leverage disappears the moment the contract is signed. Before you sign, you need to understand how the commission is calculated, who funds the cash inside the machine, how long you are locked in, what it costs to leave early, and where liability sits.

How the Money Actually Works

Revenue comes primarily from the surcharge each cardholder pays to withdraw cash. The national average surcharge has climbed for several consecutive years and sits at roughly $3.00 to $3.50 per transaction, with individual machines charging anywhere from $2.50 to $5.00 depending on location and traffic. The contract locks in a specific surcharge amount and spells out how that revenue is divided between the provider (often called an Independent Sales Organization, or ISO) and the merchant hosting the machine. A typical merchant commission runs $0.50 to $1.50 per transaction, with higher-traffic locations commanding better splits.

The single most important distinction in the financial section is whether your commission is calculated on the gross surcharge or the net surcharge. Gross means you get your cut of the full surcharge collected. Net means the provider first subtracts network fees, communication costs, and processing charges, then splits what remains. The difference can quietly eat 20 to 40 percent of what you expected to earn. If the contract says “net,” demand a line-item breakdown of what gets deducted before your share is calculated, and push for a cap on total deductions as a percentage of gross.

ATM transactions also generate interchange revenue. For Visa-branded transactions, the card-issuing bank pays the ATM acquirer an interchange reimbursement fee of $0.30 to $0.60 per cash withdrawal, depending on the transaction tier.1Visa. Visa USA Interchange Reimbursement Fees Most placement agreements assign this income entirely to the provider. Some merchants with high volume successfully negotiate a small share, but it takes real leverage.

Commission payments typically land in the merchant’s bank account on a monthly cycle, often by the 15th of the following month. Watch for low-volume clauses buried in the financial section. Some contracts impose a monthly fee on the merchant if the machine fails to hit a minimum transaction count, turning a revenue source into an expense at a slow location.

Who Supplies the Vault Cash

Every placement agreement must identify who provides the vault cash, meaning the physical currency loaded into the machine. This decision shapes the entire economics of the deal. When the ISO supplies the cash, in what is often called a full-service or turnkey arrangement, the merchant takes on almost no operational risk but receives a smaller commission. When the merchant funds the vault cash, they tie up their own capital inside the machine, bear the risk of theft, and handle or arrange for replenishment, but they typically earn a significantly larger share of each transaction.

Self-funding also triggers federal regulatory obligations that catch many merchants off guard. The Financial Crimes Enforcement Network classifies certain ATM operations as money services businesses, and independent operators who handle their own cash may need to register with FinCEN and comply with Bank Secrecy Act requirements, including suspicious activity reporting and customer identification procedures.2eCFR. 31 CFR Part 1022 – Rules for Money Services Businesses An exemption exists for businesses that operate solely as agents of another registered MSB, but the line between agent and independent operator depends on the specific arrangement.3Financial Crimes Enforcement Network (FinCEN). Statement on Bank Secrecy Act Due Diligence for Independent ATM Owners or Operators Failing to register when required carries a civil penalty of $5,000 per day of noncompliance, and willful violations can result in up to five years in prison.4Financial Crimes Enforcement Network (FinCEN). Enforcement Actions for Failure to Register as a Money Services Business Get legal advice before choosing the self-funded route. The penalties are disproportionately severe relative to the revenue a single ATM generates.

In a full-service arrangement, hardware maintenance, repairs, and software updates fall to the ISO. The merchant’s responsibilities are smaller but still worth specifying in writing: a dedicated 110-volt outlet, a reliable internet connection, and receipt paper restocking. These sound trivial until the machine sits dark for two weeks because nobody’s job description included replacing the paper roll.

Term Length and the Renewal Trap

Most placement agreements run for an initial term of three to five years.5University of San Diego. ATM Agreement Between U.S. Bank and University of San Diego The real trap is what happens at the end. Many contracts include an evergreen clause that automatically renews the deal for another multi-year period unless the merchant sends a written cancellation notice within a narrow window, often 60 to 90 days before expiration.6Salisbury University. PNC ATM Lease Agreement Miss that window by a day and you could be locked in for another full term at the original commission rate while competitors offer better splits. Some agreements renew for a term equal to the original, meaning a five-year deal quietly becomes a ten-year commitment.

Negotiate the renewal structure before signing. Push for one-year automatic renewals instead of multi-year extensions, and insist on a mutual termination right with 60 or 90 days’ written notice during any renewal period. Then calendar the cancellation deadline the day you sign the original contract.

Exclusivity and Right of First Refusal

Nearly every placement agreement bars the merchant from hosting a competing ATM from a different provider. This protects the ISO’s transaction volume and is reasonable for a standard single-location business. The problem shows up for merchants who operate large facilities, multi-tenant buildings, or properties with separate entrances. Negotiate the protected zone precisely. A blanket exclusivity clause covering “the premises” could prevent you from placing a second machine in a food court 200 feet from the first one.

A right of first refusal adds another layer. When the contract expires and a competing provider offers better terms, the clause requires the merchant to present those terms to the incumbent and give them a set period to match. If they match, you are stuck with them even though you found something better. The clause is not inherently unreasonable, but negotiate a short matching window (15 days rather than 30) and require the match to be on all material terms, not just the commission rate.

Early Termination Costs

Walking away before the term ends almost always costs money. The question is how much, and the formula should be clear to you before you sign.

The most common approach is an amortized installation cost model. The provider calculates the total cost of building out and installing the ATM, amortizes that figure on a straight-line basis over the contract term, and charges the merchant for the unamortized balance remaining at the termination date. On a five-year contract where installation cost $5,000, walking away after two years could mean reimbursing $3,000.

Some contracts use a liquidated damages formula instead, calculating the buyout as average monthly revenue over a trailing period multiplied by the number of months remaining. This produces dramatically higher numbers. Negotiate a cap on early termination fees and push for a declining-balance formula that shrinks the penalty as the contract matures. Also confirm whether the merchant has a right to terminate for cause (persistent equipment failures, extended downtime, or the provider’s breach of service-level commitments) without triggering a buyout.

Liability, Security, and Insurance

The indemnification section determines who pays when something goes wrong. In a well-drafted agreement, the ATM operator indemnifies the property owner against claims arising from the operator’s negligence, including personal injury and property damage connected to the machine’s installation and operation. If a customer trips over exposed wiring the installer left, the provider’s insurance covers the claim, not the merchant’s.

Property owners also face premises liability exposure if a customer is robbed while using the ATM. Courts evaluate these cases under a negligent-security theory, examining lighting, functional cameras, and reasonable placement of the machine. An ATM tucked into a dark exterior corner invites a lawsuit. The agreement should specify minimum security conditions for the site and allocate responsibility for maintaining them. Those conditions also tie directly to the provider’s insurance coverage, and failing to maintain them can void key protections.

Insurance requirements in a placement agreement typically include commercial general liability coverage carried by the ATM operator, often with minimums of $1,000,000 per occurrence and $2,000,000 in aggregate. The agreement should also address commercial property insurance covering the machine on a replacement-cost basis. Verify that your own general liability policy does not exclude claims arising from third-party equipment on your premises. If it does, negotiate for the ATM provider’s policy to name you as an additional insured, or adjust your own coverage before the machine arrives.

Compliance the Contract Should Pin Down

Three bodies of law reach every ATM in a public-access location, and the agreement should allocate responsibility for each.

ADA Accessibility

Section 707 of the ADA Standards requires machines to be speech-enabled so visually impaired users can independently complete transactions. The machine must provide clear floor space for wheelchair access and position the display so it is visible from 40 inches above the floor.7U.S. Access Board. ADA Standards – Chapter 7: Communication Elements and Features Hardware compliance is the provider’s responsibility, but the merchant controls the physical environment. A merchandise shelf that blocks wheelchair access can pull the merchant into liability. The agreement should state that the provider delivers ADA-compliant equipment and that the merchant maintains compliant clearances around it.

EMV Chip Reading

Visa and Mastercard both implemented liability shifts for ATM transactions. Mastercard’s took effect in October 2016, Visa’s in October 2017. When a counterfeit magnetic-stripe card copied from a chip card is used at a non-chip-enabled ATM, fraud liability falls on the ATM acquirer rather than the card-issuing bank. In a full-service placement, this liability typically sits with the ISO, but the contract language matters. Review the indemnification section to confirm the provider accepts responsibility for counterfeit fraud losses on their equipment. If the merchant owns or leases the machine directly, the exposure is theirs unless the contract says otherwise.

Regulation E Fee Disclosure

Under Regulation E, an ATM operator that charges a surcharge must notify the consumer of the fee amount before the consumer is committed to paying it. The notice must appear on the machine’s screen or on a printed slip, and the consumer must have the opportunity to cancel the transaction after seeing the fee.8Consumer Financial Protection Bureau. Regulation E – 1005.16 Disclosures at Automated Teller Machines In a full-service arrangement, the ISO programs and maintains these disclosures. The agreement should include a representation that the machine’s software complies with Regulation E, along with indemnification for fines or penalties if it does not.

Tax Treatment of Commission Income

ATM commission income is taxable. Merchants who earn $600 or more per year from a placement agreement should expect a Form 1099-NEC from the provider reporting the payments as nonemployee compensation.9Internal Revenue Service. Instructions for Forms 1099-MISC and 1099-NEC The income typically goes on Schedule C and is subject to self-employment tax if total net self-employment earnings across all activities exceed $400 for the year. Merchants who did not budget for the 15.3 percent self-employment tax bite on top of regular income tax rate sometimes find their effective commission smaller than expected.

State-level rules vary. Some states require separate registration or licensing for ATM operators. Merchants who use a full-service ISO generally avoid these obligations because the ISO holds the licenses. Merchants who purchase their own machines or fund their own vault cash step into a more complex compliance landscape.

Where to Push in Negotiation

Your strongest bargaining chip is location quality. A high-traffic spot in a nightlife district or tourist area generates hundreds of transactions per month, and ISOs compete aggressively for those placements. If your location fits that profile, get proposals from at least three providers before signing anything. The difference between a mediocre deal and a good one over a five-year term can easily reach tens of thousands of dollars. The specific terms worth the hardest push:

  • Commission structure. A busy convenience store or bar can push for $1.00 to $1.50 per transaction, or a percentage split of 20 to 35 percent of gross surcharge. The party taking the greater financial risk earns the larger share, so a merchant willing to fund vault cash has far more leverage on the split.
  • Gross versus net calculation. Always negotiate for gross surcharge as the basis for your commission. If the provider insists on net, demand a written schedule of every deduction.
  • Contract term. Providers prefer five-year terms because they amortize installation costs over a longer period. Strong locations can negotiate three-year terms or annual renewals after the initial period.
  • Surcharge amount. The provider usually sets the surcharge, but the merchant can negotiate input. Setting it too high suppresses volume, which hurts both sides. A surcharge at or slightly below the market average for your area tends to maximize total commission over time.
  • Assignment restrictions. Most agreements let the ISO assign the contract to a third party without the merchant’s consent. Negotiate written approval before any assignment, or at minimum a right to terminate if the contract is assigned.
  • Performance guarantees. Push for a minimum uptime guarantee (95 percent is reasonable) and a right to terminate without penalty if the machine consistently underperforms. Without this language, a broken machine sitting in your store for months costs you floor space with no recourse.

Read the agreement with a pen in hand, mark the clauses that trade long-term flexibility for short-term convenience, and treat the first draft as the provider’s opening offer. It almost always is.